|
"Apache Discharge Hose — 1 1/2in. x 25ft. , Model# 98138120"
"Medium-duty PVC lay flat contractors discharge hose for water, light chemical and pumping services in the agricultural, rental, mining, marine, construction and irrigation industries.1 1/2in. x 25ft.PVC tube and cover are reinforced with 3-ply polyester yarns (one longitudinal and two spiral plies)Both tube and cover are extruded simultaneously to obtain maximum bondingCouplings are Male x Female aluminum short shanks with band-it clampsResists oil, grease and many chemicals and acidsNonwater absorbing and mildewproof hose rolls flat for easy storageTemperature range: -5° to 130°F150 PSIUSMSHA IC-150/1Model 98138120"
click here for more info |
"Apache High Temperature Water Discharge Hose — 450 PSI, 50ft. Length"
"1 1/2in. x 50ft. heat resistant brick red discharge hose has burst pressure of 450 PSI. Requires adapter and nozzle, making the hose a perfect industrial cleaner. Use nozzle, Item# 108910 for a great high volume pressure washing application or for wetting down property for fire prevention. Nozzle and adapter sold separately. Hose is for use with 1 1/2in. and 2in. discharge high pressure pumps only. U.S.A.Great for fire protection and prevention!A perfect industrial cleaner!"
click here for more info |
|
"Apache Suction/Discharge Hose — 2in. x 20ft., Model# 98128180"
"Lightweight, rugged and flexible contractors poly/rubber suction/discharge hose for agricultural, rental, mining, and construction industries. Hose is resistant to herbicides and pesticides, including Lasso. Maintains good flexibility in cold weather.WARNING: Not for transfer of anhydrous ammonia. For undiluted chemicals, consult Apache for hose recommendations.2in. x 20ft.EPDM construction with polyethylene helix reinforcement that serves as a scuff stripCouplings are Male x Female aluminum short shanks with band-it clampsTemperature range: -30° to 140°FNot for transfer of anhydrous ammoniaModel 98128180"
click here for more info |
"Briggs & Stratton Davey Twin Impeller Water Pump — 7200 GPH, 9 HP, 1.5in., Model# AK282"
"9 HP Briggs & Stratton OHV Vanguard engine with electric start and recoil backup. Economical, compact, portable. Hi-pressure 2-stage twin impeller high efficiency pump. Marine-grade aluminum casing. 3-way discharge port. Nitrile rubber seal and casing O-rings. Self-priming up to 19ft. Proven robust design for long life. Corrosion-resistant materials. Low oil protection.Engine: 9 HP Briggs & Stratton OHV VanguardStarting Method: Electric Start with Recoil BackupPump is self-primingMaximum Total Head: 375ft.Maximum Suction Lift: 25ft.Inlet: 1 1/2in.Outlet: One 1 1/2in. and Two 1in. portsMoves up to 7200 GPH144 PSI high-pressure system great for fire protectionLow Oil ProtectionNitrile rubber seal and casting 0-ringsMarine-grade aluminum castingDimensions: 22.7in.L x 18.8in.W x 17.3in.H"
click here for more info |
|
"Briggs & Stratton Davey Water Pump — 4800 GPH, 6 HP, Model# AK280"
"Economical, compact, portable. Hi-pressure 2-stage twin impeller high efficiency pump. Reliable 6 HP Briggs & Stratton OHV Vanguard engine with recoil start. Marine-grade aluminum casing. 3-way discharge port. Nitrile rubber seal and casing O rings. Self priming up to 19ft. Proven robust design for long life. Corrosion-resistant materials. Low oil protection.4800 GPH, 302ft. maximum total head134 PSI high pressure system is great for fire protection"
click here for more info |
"Flotec 3-Wire Submersible 4in. Deep Well Pump — 1/2 HP, 1 1/4in., Model# FP3212-02"
"Economical, energy-efficient pumps for 4in. inside diameter or larger wells. Pump from depths of 400ft. Patented Floating Stack design resists sand and reduces sand locking. Stainless steel pump and motor housing for long life. Heavy-duty 1 1/4in. NPT discharge connection. Water-filled submersible motor. Precision-molded impellers and diffusers. 230 Volts. Includes built-in check valve. UL approved. 3-year limited warranty. U.S.A.1/2 HP 230 Volt, 5 Amp motor600 GPHStainless steel pump and motor housing for durability and corrosion resistanceTotal Discharge Head: 150ft.1 1/4in. suction port1 1/4in. discharge portThree wireFloating Stack designWater filled submersible moto precision molded impellers and diffusersBuilt in check valveIncludes control box3-year limited warrantyU.S.A.Model FP3212-02"
click here for more info |
|
"Flotec Floodmaster Submersible Sump Pump — 6000 GPH, 3/4 HP, 1 1/2in., Model# FP0S6000A-08"
"Features rust-resistant thermoplastic volute and housing, tough polycarbonate impeller and thermally protected, oil-filled motor. Vertical float switch provides reliable operation and allows installation in 13in. basins. High-capacity 1 1/2in. NPT discharge. Will replace most pedestal pumps with no plumbing changes. 14in. H x 7in. W x 9.5in. L. UL listed. Limited lifetime warranty. U.S.A.3/4 HP 115 Volt, motorHousing for durability and corrosion resistance11/2in. suction port1 1/2in. discharge portMoves 6000 GPH@ 5-ft. head; 3800 GPH @ 15-ft. headRust-resistant thermoplastic voluteThermally protectedOil-filled motorVertical float switchAllows installation in a 13in. basinDimensions: 9.5in.L x 7in.W x 14in.HLimited lifetimeU.S.A.Model FP0S6000A-08"
click here for more info |
"Flotec Horizontal Precharged Water System Tank — 15 Gallon, Model# FP100H"
"Constructed of heavy-gauge steel with tough, appliance-like finish. Replaceable air/water separator prevents corrosion and bacterial growth — in compliance with FDA regulations. Tank is factory precharged to 40 PSI. Includes pump mounting bracket. The 15-gallon tank size compares with equivalent size of standard tanks in terms of water drawn down between pump cycles.Horizontal designSize (W x H) 17in. x 18in.Drawdown, Gallons@PSI: 20/40 PSI--2.2@20/40 PSI 30/50 PSI-- 1.8@30/50 PSIDischarge Size 3/4in."
click here for more info |
|
"Flotec Multistage Booster Pump — 720 GPH, 1 HP, 3/4in., Model# FP5732"
"High pressure booster pumps increase water pressure from city mains or private water systems. Designed with innovative SignaSeal® wear system for unbelievable durability and dead-head resistance! Each with stainless steel pump/motor shaft, heavy duty ball bearings and onboard thermal overload protection. 3/4in. port sizes. 1-year limited warranty. U.S.A.115/230 Volt, 60 Hz motor12 GPM @ 110 PSIMax PSI 190Pump Diameter 9in. x 6.5in. x 27.25in.1-year limited warrantyU.S.A.Model FP5732"
click here for more info |
"Flotec PressureMate Home Pressure System — 1560 GPH, 3/4 HP, 1in., Model# FP4815"
"Increases water pressure in your home for more effective showering, washing and overall water usage. Adjustable starting pressure dial provides maximum desired performance. Built-in controller monitors system pressure and flow and turns pump on and off automatically. Heavy-duty 3/4 HP motor is quiet, safe and maintenance free. No assembly required.3/4 HP 115 Volt, motorHousing for durability and corrosion resistanceMax PSI: 40 PSI1in. suction port1in. discharge portMoves up to 1560 GPHAdjustable starting pressure dial provides maximum desired performancePressureMate™ controller turns pump on and off automaticallyExtremely quiet for indoor useHeavy-duty motor for safe, maintenance free operationAssembled, ready to installLarge mounting base 6ft. power cordModel FP4815"
click here for more info |
|
"Flotec Stainless Steel Waterfall/Utility Pump — 4100 GPH, 1/2 HP, 1 1/4in., Model# FP0S4100X"
"Waterfall/utility pumps are multifunctional and are ideal as utility pumps or to create streams and waterfalls in your backyard/garden pond. Complete stainless steel construction for superior corrosion resistance. Premium ceramic seal design allows for continuous operation and high performance thats ideal for ponds and waterfalls. 2-year limited warranty.1/2 HP oil-free motor is safe for both fish and plant life4100 GPHDual ball bearing design means quiet, troublefree serviceEnergy-efficient 800 Watts 115V Submersible pumpIncludes 15ft. grounded power cord and 1 1/4in. x 1in. NPT adapterUL/CSA listed2-year limited warrantyModel FP0S4100X"
click here for more info |
"Flotec Submersible Sewage Ejector Pump — 7000 GPH, 1/2 HP, 2in., Model# FPSE3601A04"
Heavy-duty pump is ideal for removing raw sewage or waste water from basements or septic tanks. Cast-iron construction. Pumps up to 2in. diameter soft solids. Automatic wide-angle float switch. 10-ft. power cord. U.S.A.Engine: 1/2 HP 115 Volt 20 Amp motorMaximum Total Head: 16ft.2 1/2in. ports handle soft solids up to 2in. in diameterMoves 2500 GPH @ 16ft. head; 7000 GPH @ 6ft. headHeavy duty cast iron constructionAutomatic wide-angle float switchMinimum basin required: 18in.10 ft. power cordDimensions: 17.5in.H x 9.5in.WModel FPSE3601A04
click here for more info |
|
"Flotec Waterfall/Utility Pump — 3000 GPH, 4/10 HP, 1in., Model# FP0S3000X"
"Waterfall/utility pumps are multifunctional and are ideal as utility pumps or to create streams and waterfalls in your backyard/garden pond. Engineered composite, stainless steel construction for superior corrosion resistance. Premium ceramic seal design allows for continuous operation and high performance thats ideal for ponds and waterfalls. 1-year limited warranty.4/10 HP oil-free motor is safe for both fish and plant life3000 GPHDual ball bearing design means quiet, troublefree service350 WattsIncludes 15ft. grounded power cord and 3 discharge fittings: 1/2in., 3/4in. and 1in. barbed hose, 1in. reducer and garden hose adapterUL/CSA listed1-year limited warrantyModel FP0S3000X"
click here for more info |
"IPT Pumps Gorman Rupp Heavy-Duty Trash Pump — 18,000 GPH, 5.5 HP, 3in., Model# 3S5AR"
"Self-priming pump with 103ft. head, 26ft. max. suction lift. Die cast aluminum pump housing. 3in. ports handle up to 1 1/4in. solids. EDPM gaskets and Viton seal. Includes Free metal strainer. 1-year limited warranty. U.S.A.Engine: 5.5 HP Briggs Intek enginePump is self-primingMaximum Total Head: 103ft.Maximum Suction Lift: 26ft.3in. ports handle solids up to 1 1/4in. in diameterMoves up to 18,000 GPH/ 300 GPMStarting Method: Recoil OnlyMax PSI: 44 PSISiliconized carbide mechanical sealDuctile impeller and cast iron voluteDie cast aluminum pump housingIncludes FREE metal strainerModel 3S5AR"
click here for more info |
|
"IPT Pumps Gorman Rupp Water Pump — 8200 GPH, 6.5 HP, 2in., Model# 2P5IR"
"Ideal for fire-fighting and other high volume needs. 6.5 HP Briggs Intek engine. Built in check valve for repriming. EPDM gaskets and seals. Comes with roll cage item# 108901. Includes FREE strainer. U.S.A.Engine: 6.5 HP Briggs Intek enginePump is self-primingEngine has Oil Guard™Maximum Total Head: 200ft.Maximum Suction Lift: 18ft.2in. suction/discharge portsMoves up to 8,200 GPH at 20 ft. head.Max PSI: 88 PSIFuel Tank: 3 quartStarting Method: Recoil OnlyEngine has cast iron cylinderNylon zytel plastic impeller and cast iron voluteDual element air cleanerPump runs 1 1/2 hours on a 3 quart tankIncludes FREE strainerDimensions: 18 1/2in.L x 16 1/2in.W x 15 1/4in. H"
click here for more info |
"IPT Pumps Self-Priming Centrifugal Pump — 4680 GPH, .75 HP, 1 1/2in., Model# 2825-IPT-95"
"Self-priming centrifugal pump features cast iron construction and is ideally suited for both industrial and commercial applications that require high-volume liquid transfer, waste-water drainage and processing. Equipped with ODP motor. 1-year limited warranty. U.S.A..75 HP, 1 phase motor115/230 Volts @ 60Hz+1 1/2in.suction NPT1 1/2in. discharge NPT78 GPM maximum flow72ft. maximum head @ 31 PSIBuna-N sealsDual volute design and self-cleaning, clog-resistant impellerBuilt-in check valve ensures consistent self-priming to 20 feetHandles 3/8in. dia. solids1-year limited warrantyU.S.A.Model 2825-IPT-95"
click here for more info |
|
